These are the standard SKUs. Custom runs take about 1 weeks longer.
| Item | Standard Spec |
| Product type | PVC anti-slip tape with a quartz sand textured surface and oil-based adhesive for selected stairs, ramps, walkways, platforms, and work areas. |
| Surface material | Quartz sand creates the textured contact surface intended to add traction under suitable footwear. |
| Backing material | PVC provides the tape base that carries the textured surface and supports measure-and-cut application. |
| Adhesive | Oil-based adhesive is used for surface bonding. Final adhesion depends on the substrate, surface preparation, pressure, temperature, moisture, and dwell time. |
| Standard thickness | 0.6mm total thickness. Customizable, but a higher MOQ applies. |
| Roll widths | 25mm and 50mm. Customizable, but a higher MOQ applies. |
| Roll length | 5m per roll. Customizable, but a higher MOQ applies. |
| Surface function | The quartz sand texture adds a grip-focused contact layer on suitable areas. Actual slip performance depends on footwear, contamination, installation, and site conditions. |
| Recommended uses | Selected stair treads, ramps, thresholds, platforms, walkways, entrance approaches, and work areas where an added grip strip is appropriate. |
| Recommended surfaces | Clean, dry, stable surfaces such as sealed concrete, metal, tile, wood, painted floors, and other compatible materials after a small adhesion test. |
| Application method | Clean and dry the surface, cut the tape to length, apply without stretching, press the full strip and edges firmly, and check that the installation is secure. |
| Removal guidance | Lift a corner and peel slowly. Test first on painted, coated, varnished, delicate, or aged surfaces because adhesive behaviour may vary. |
| Working conditions | Keep the substrate free of dust, oil, moisture, loose coating, and uneven sections. Temperature, water exposure, traffic, and cleaning routines affect service performance. |
| Standard colours | Regular colours are black, yellow, grey, and black&yellow hazard stripe. Other colours can be reviewed by order and sample confirmation. |
| Payment | 30% T/T deposit, 70% before shipment. L/C accepted for orders >$15K. |
(Direct-use reasons for contractors, facility-maintenance teams, hardware distributors, safety-product buyers, renovation suppliers, and private-label customers)
🔨 “It gives a plain surface a more tactile finish”
The quartz sand surface provides a clear grip-focused layer for selected steps, ramps, and walking zones. Buyers can position it as one practical part of a wider site-safety routine.
🔨 “The two widths are easy to specify”
A 25 mm strip suits narrow edges and targeted placement, while 50 mm offers broader coverage. This focused range makes stock planning and product selection straightforward.
🔨 “A 5 m roll is simple to cut and pack”
Installers can trim each roll to match the actual step, ramp, or work area. The roll format also works well for hardware retail packs and maintenance stock.
🔨 “PVC and quartz sand make the construction easy to explain”
The buyer sees a PVC tape base with a textured quartz sand surface and an oil-based adhesive. Samples help confirm the feel, surface bond, and preferred installation method before an order is finalized.
🔨 “The product supports practical maintenance work”
Use it where a defined extra-grip strip is useful, such as selected stairs, ramps, thresholds, platforms, and entrance areas. The surface must be assessed for suitability before application.
🔨 “Custom dimensions can follow the project brief”
Share the target width, roll length, thickness, grit preference, label format, packing style, quantity, and destination. Custom dimensions can be reviewed when the order supports a higher MOQ.
Q1: What is PVC anti-slip tape used for?
A: It is used to add a textured grip strip to suitable stairs, ramps, walkways, platforms, thresholds, and work areas. It works best as part of normal safety practice, alongside clean floors, good lighting, and suitable footwear.
Q2: What is the surface material?
A: The visible grip surface uses quartz sand on a PVC tape construction. The texture is designed to provide a more tactile contact area under footwear.
Q3: What adhesive does it use?
A: This product uses an oil-based adhesive. Bonding depends on the substrate, surface preparation, pressure, temperature, moisture, and the time allowed for the tape to settle, so sample testing is recommended.
Q4: Can it be used on stairs?
A: It can be considered for suitable stair surfaces when the area is clean, dry, stable, and free from loose coatings. Measure the contact area carefully and test a small section before a full installation.
Q5: Which width should I choose?
A: The standard widths are 25 mm and 50 mm. Choose 25 mm for a narrow strip or step edge and 50 mm when a broader grip area is preferred. The best choice depends on the step or walkway layout.
Q6: How long is one roll?
A: Each standard roll is 5 m long. Cut the tape to the required length during installation, leaving clean and firmly pressed edges.
Q7: Will it adhere to every surface?
A: No. Adhesion can vary greatly on rough, dusty, wet, uneven, oily, coated, or low-surface-energy materials. Clean and dry the area, then test a sample on the actual substrate before specifying the product.
Q8: Can the thickness, width, and length be customized?
A: Yes. The standard thickness is 0.6 mm, with 25 mm and 50 mm widths and a 5 m roll length. Thickness, width, and length can be customized, but a higher MOQ applies. Confirm the final construction with samples before production.
Main Contact: Judy (Export Sales Manager)
📧 Email (fastest): hftape1@gmail.com
📞 WhatsApp (if urgent): +86-195-5053-2146
💬 WeChat ID: +86-195-5053-2146
⏰ Office hours: Mon-Fri 8am-6pm (GMT+8)
📍 Factory location: Zhejiang Province (2 hrs from Ningbo port)
⚡ Response time: Usually within 12 hours
