These are the standard SKUs. Custom runs take about 1 weeks longer.
| Item | Standard Spec |
| Product type | PVC waterproof tape with a hot-melt adhesive layer for suitable sealing, patching, and maintenance applications. |
| Face material | PVC film provides a continuous flexible facing for covering a seam, joint, crack, or local repair area. |
| Adhesive | Hot-melt adhesive is applied to the backing for pressure-sensitive bonding. |
| Standard thickness | The standard version is 0.45 mm total thickness. |
| Thickened version | A 0.70 mm thickened option is available where buyers want a fuller covering layer. |
| Roll widths | Standard roll widths are 50 mm, 100 mm, 200 mm, and 300 mm for different repair paths and coverage requirements. |
| Roll length | The standard roll length is 1.5 m, a compact format for repair kits, maintenance stock, and small-area sealing work. |
| Sheet widths | Piece-cut formats are available in 100 mm and 200 mm widths for ready-sized patches and counter or kit packing. |
| Sheet lengths | Piece-cut formats are available in 100 mm and 200 mm lengths. |
| Customization | Thickness, width, and length can all be customized. Confirm MOQ, the drawing, tolerance, roll or sheet format, label, and packing before production. |
| Common applications | Suitable project uses may include sealing cracks, joints, overlaps, pipe areas, roof or wall details, and local waterproofing repairs after a surface test. |
| Surface preparation | The substrate should be clean, dry, sound, and free from dust, oil, loose coating, standing water, and sharp contamination before application. |
| Installation method | Measure the repair area, cut the tape or select a sheet, remove the release liner if supplied, position carefully, and press from the centre toward the edges. |
| Packing options | Roll labels, piece labels, core size, individual bags, carton quantity, private-label artwork, and export carton details can be confirmed by order. |
| Payment | 30% T/T deposit, 70% before shipment. L/C accepted for orders >$15K. |
(Direct-use reasons for waterproofing contractors, maintenance distributors, hardware buyers, repair-kit brands, and private-label customers)
🔨 “It gives a small repair a proper covering layer”
For a seam, crack, overlap, or local leak point, a continuous PVC strip is easier to measure and position than an improvised patch. The substrate still needs to be suitable and prepared correctly.
🔨 “The width range matches different repair jobs”
A 50 mm roll can handle a narrow line, while 100 mm, 200 mm, and 300 mm options provide more coverage for wider details. Buyers can keep one product family across several channels.
🔨 “The thickened version gives another option”
Some jobs call for a more substantial covering layer. Offering 0.45 mm and 0.70 mm lets the buyer test the profile against the surface instead of forcing every project into one thickness.
🔨 “Rolls work on site and sheets work in kits”
A 1.5 m roll suits measure-and-cut repairs. Ready-sized 100 mm or 200 mm pieces are convenient for maintenance packs, retail sets, and jobs where speed matters more than custom cutting.
🔨 “The next order can follow the approved sample”
Once the thickness, width, length, adhesive build, label, and packing are confirmed, repeat orders can stay aligned with the version already tested by the distributor or contractor.
🔨 “Judy helps close the technical details”
Share the substrate, repair size, target quantity, pack format, label artwork, and destination. Judy can check samples, custom dimensions, packaging, and the production plan before confirmation.
Q1: What is PVC waterproof tape used for?
A: It is commonly used for suitable sealing and repair work on cracks, joints, overlaps, pipe areas, roof or wall details, and local waterproofing points. Always test the actual substrate and application first.
Q2: What is the tape made from?
A: The face material is PVC and the adhesive is hot melt. The exact PVC grade, adhesive formula, finish, and colour should be confirmed for the production version you plan to sell.
Q3: What is the difference between 0.45 mm and 0.70 mm?
A: 0.45 mm is the standard profile, while 0.70 mm is the thickened option. Choose based on the repair area, required coverage, flexibility, and available clearance rather than thickness alone.
Q4: Which roll width should we choose?
A: Standard roll widths are 50 mm, 100 mm, 200 mm, and 300 mm. Measure the repair and allow enough tape to extend onto sound material on both sides; a sample makes the choice easier.
Q5: Are there cut sheet options?
A: Yes. Piece formats are available in 100 mm and 200 mm widths and lengths. They are useful for repair kits and quick patching, and the exact cut size can be discussed for your pack.
Q6: How should we apply it?
A: Clean and dry the surface, remove loose material and oil, measure the repair, and dry-fit the tape. Peel the liner gradually if supplied, press from the centre outward, and smooth the edges without stretching the tape.
Q7: Is the standard roll length 1.5 m?
A: Yes. The standard roll is 1.5 m, and roll length can be customized. Please confirm the target length, core, winding, label, and carton plan before production.
Q8: Can thickness, width, length, and packaging be customized?
A: Yes. Thickness, width, and length are all customizable. Colour, cut-sheet size, label artwork, core, roll count, carton packing, and private-label requirements can also be reviewed with Judy.
Main Contact: Judy (Export Sales Manager)
📧 Email (fastest): hftape1@gmail.com
📞 WhatsApp (if urgent): +86-195-5053-2146
💬 WeChat ID: +86-195-5053-2146
⏰ Office hours: Mon-Fri 8am-6pm (GMT+8)
📍 Factory location: Zhejiang Province (2 hrs from Ningbo port)
⚡ Response time: Usually within 12 hours
